Miller Wildcat 200 Saves The Day Following Hurrican Sandy

The Miller Wildcat 200 is a great little portable engine driven welder. The 14 horsepower Subaru engine produces enough power to provide 200 amps of welding output and 6,500 watts of peak generator power. I didn't realize the value and performance of the Wildcat welder as a stand-by generator until Hurricane Sandy hit. I was without power for 10 full days. Living in an area where city water is not available and nighttime temperatures dipped into the 20's, being without power was simply not an option. The max KVA receptacle on the Wildcat 200 gave me more than enough power to run my water pump, heating system, 2 refrigerators and several circuits of lights. I was even able to run my washer and dryer off the Wildcat, when I needed to do laundry. The best thing about the Wildcat 200 was the fuel consumption. Even while running half my house, the Wildcat burned less than 1/2 gallon of gas per hour; that was really significant since gasoline was not readily available for days after the storm. The Wildcat used 1/2 the gas my Bluestar 185 DX uses to operate the same equipment. What's more, I operated the Wildcat for 240 hours non-stop with no mechanical issues. http://store.cyberweld.com/miwi200endrd.html

The Miller Multimatic™ 200 welder is Miller's first truly portable multiprocess welder.  The Multimatic™ 200 is a MIG welder, Stick welder and DC TIG welder all-in-one.

Auto-Set™ Elite allows the Multimatic™ 200 to run on either 120 volt or 230 volt input power using Miller's exclusive multi-voltage plug (MVP™). The  Auto-Set™ Elite feature also allows the user to fine tune input voltage to the exact incoming input voltage, providing a precision welding arc.
Processes

MIG (GMAW)

Stick (SMAW)

Flux Cored (FCAW)

DC TIG (DC GTAW)



From now until September 30, 2012, get a mail-in rebate form for a FREE Miller ArcStation 30FX weld table when you purchase a Multimatic™ 200
Only $1,795.00 on Cyberweld.com with free standard ground shipping within contiguous U.S.
http://store.cyberweld.com/mimu200auelw.html

Magswitch® Pivot Angle 200 8100367

The Magswitch® Pivot Angle 200 pivots from 22° to 270°, with 200 pounds of magnetic holding power on each axis. Pivot Angle 200 is one of the most versatile workholding/positioning tools in the world.



Features

Versatile Workholding Angle withPivot Range from inside 22° to270° angles.

Each axis features a 200 lbs.(91 kg) Magswitch magnet.

Multi plane workholding on threesides of each magnet.

Accommodates flat and pipe stock.

http://store.cyberweld.com/mapian20081.html

Thermal Arc 181i MIG/Stick/TIG Welder

The Thermal Arc® Fabricator® 181i is a MIG welder, Stick welder and TIG welder in one. With 180 amps of MIG welding output and 175 amps of Stick/TIG welding output, the 181i easliy covers the most common welding applications.





Processes

MIG (GMAW)

Flux Cored (FCAW)

DC Lift TIG (GTAW)

STICK (SMAW)

Applications

Automotive Repair & Customization

Farms & Ranches

Training Institutions

Maintenance & Repair

Sheet Metal & Light Fabrication

On-site & Portable Welding Applications

Home Hobbyists (DIY)



http://store.cyberweld.com/tharcfa18miw.html

Miller Golden Ticket Cash Back Promotion On Now!

From now until November 4, 2011 receive up to $300.00 cash back from Miller Electric when you buy selected Miller welders, welding stations, or welding helmets at Cyberweld.com.

Miller Golden Ticket Cash Back models include: Miller Bobcat 250 EFI, Bobcat 225, Diversion 180 TIG welder, ArcStation 60SX (fully loaded), Millermatic 212, Millermatic 211, Millermatic 180, Millermatic 140, ArcStation 30FX and all Miller Digital Elite welding helmets.

http://store.cyberweld.com/migoticabapr.html

Save Phace EFP Welding Helmets In Stock Now

Save Phace™ EFP (Extreme Face Protector) welding helmets are the world's first welding helmets to offer the welder a full 180 degree view of the welding environment.

Save Phace™ "Old School" series EFP welding helmets come complete with a 180 degree passive shade 10 lens. "Gen X" series helmets feature an integrated auto-darkening fixed shade 10 lens and 180 degree passive shade 10 lens.

All EFP welding helmets have interchangeable 180 degree view lenses available in clear, shade 3, shade 5, shade 8, shade 10 or shade 12.

In stock now at discounted prices at Cyberweld.com

Speedglas 9100 FX Features Integrated Grinding Shield

The new 9100 FX welding helmet combines legendary Speedglas™ quality and auto darkening technology with an innovative wide-view grinding visor to give welders an all-in-one solution for more flexibilty, precision, and efficiency. The exceptionally clear, wide grinding visor offers a greater field of view in all directions, while a smooth flip-up pivot mechanism assures effortless transition from welding to grinding modes.

New front air exhaust vents help reduce fogging, and highly adjustable suspension and well-balanced design enhance the well-known Speedglas top performance and comfort qualities.

Now in stock at cyberweld.com

http://store.cyberweld.com/spwehe91se.html